| Enumerator |
|---|
| SL_SUCCESS |
!!! Common error codes for all RPCs and objects Success, no errors detected.
0x0.
|
| SL_NOT_CONNECTED |
Client not connected. 0x1.
|
| SL_EAGAIN |
Operation must be retried. 0x2.
|
| SL_ENOMEM |
One or more components does not have sufficient memory. 0x3.
|
| SL_EBUSY |
Too many outstanding requests. 0x4.
|
| SL_EINVAL |
One or more arguments are invalid. 0x5.
|
| SL_UNSUPPORTED_VER |
Unsupported version. 0x6.
|
| SL_NOT_AVAILABLE |
Not Available. 0x7.
|
| SL_STREAM_NOT_SUPPORTED |
Stream mode not supported. 0x8.
|
| SL_ENOTSUP |
Operation not supported. 0x9.
|
| SL_SOME_ERR |
One or more objects is errored: Each object must be individually examined.
0xa
|
| SL_TIMEOUT |
Operation Timed out.
The result of the operation is undeterministic (success or fail). 0xb
|
| SL_NOTIF_TERM |
Due to some event, the client will no longer receive notification events on this channel.
0xc Such events include:
- Notification Session was hijacked by another client.
|
| SL_AUTH_FAIL |
Authentication failure.
Incorrect credentials passed in by RPC. 0xd
|
| SL_ACK_TYPE_NOT_SUPPORTED |
Ack type not supported error. 0xe.
|
| SL_INIT_START_OFFSET |
!!! Error codes for Client INIT operations.
Offset for INIT errors. 0x500
|
| SL_INIT_STATE_CLEAR |
Success, no errors detected - clear state.
This error is returned on the first-ever initialization, or, when a fatal event has occured and all previous state was lost. 0x501
|
| SL_INIT_STATE_READY |
Success, no errors detected - previous state is recovered.
This error is returned on a client re-initialization with successful recovery of state. Note that any unacknowledged data previously sent should be considered lost. 0x502
|
| SL_INIT_UNSUPPORTED_VER |
Server software incompatible with client software version. 0x503.
|
| SL_INIT_SERVER_NOT_INITIALIZED |
Initialization request received while server is not ready. 0x504.
|
| SL_INIT_SERVER_MODE_CHANGE_FAILED |
Server operational mode change from stream to non-stream or vice-versa failed.
0x505
|
| SL_RPC_VRF_START_OFFSET |
!!! Error codes for VRF operations.
Offset for VRF errors. 0x1000
|
| SL_RPC_VRF_TOO_MANY_VRF_REG_MSGS |
Operation rejected for ALL VRFs due to too many VRF registration messages in the request.
0x1001
|
| SL_RPC_VRF_SERVER_NOT_INITIALIZED |
Operation rejected for all VRFs as server is not initialized. 0x1002.
|
| SL_RPC_VRF_OP_NOTSUP_WITH_AUTOREG |
Operation not supported in auto-register mode. 0x1003.
|
| SL_VRF_START_OFFSET |
!!! Error codes for VRF objects.
Offset for VRF errors. 0x2000
|
| SL_VRF_NAME_TOOLONG |
VRF name in the VRF registration message is too long. 0x2001.
|
| SL_VRF_NOT_FOUND |
VRF not found during a unregister or EOF. 0x2002.
|
| SL_VRF_NO_TABLE_ID |
On a VRF registration, Table ID for the VRF is not found. 0x2003.
|
| SL_VRF_REG_INVALID_ADMIN_DISTANCE |
VRF add registration message with invalid administrative distance. 0x2004.
|
| SL_VRF_TABLE_ADD_ERR |
On a VRF registration, Table cannot be added to persistent memory. 0x2005.
|
| SL_VRF_TABLE_REGISTRATION_ERR |
VRF table cannot be registered with RIB. 0x2006.
|
| SL_VRF_TABLE_UNREGISTRATION_ERR |
VRF table cannot be unregistered with RIB. 0x2007.
|
| SL_VRF_TABLE_EOF_ERR |
VRF table RIB EOF operation error. 0x2008.
|
| SL_VRF_REG_VRF_NAME_MISSING |
VRF registration message does not have a VRF name. 0x2009.
|
| SL_VRF_V4_ROUTE_REPLAY_FATAL_ERROR |
IPv4 routes in VRF cannot be played to Routing Information Base on a process restart or connection re-establishment.
The Forwarding Information Base can can be inconsistent. Agent/Controller should initiate a recovery action by reloading the device. 0x2010
|
| SL_VRF_V6_ROUTE_REPLAY_FATAL_ERROR |
IPv6 routes in VRF cannot be played to Routing Information Base on a process restart or connection re-establishment.
The Forwarding Information Base can can be inconsistent. Agent/Controller should initiate a recovery action by reloading the device. 0x2011
|
| SL_VRF_V4_ROUTE_REPLAY_OK |
IPv4 routes in VRF were played to Routing Information Base on a process restart or connection re-establishment.
0x2012
|
| SL_VRF_V6_ROUTE_REPLAY_OK |
IPv6 routes in VRF were played to Routing Information Base on a process restart or connection re-establishment.
0x2013
|
| SL_RPC_ROUTE_START_OFFSET |
!!! Error codes for Route operations.
Offset for Route operation errors. 0x3000
|
| SL_RPC_ROUTE_TOO_MANY_ROUTES |
Operation rejected for ALL routes due to too many routes in the request.
0x3001
|
| SL_RPC_ROUTE_VRF_NAME_TOOLONG |
Operation rejected for ALL routes as the request's VRF name is too long.
0x3002
|
| SL_RPC_ROUTE_VRF_NOT_FOUND |
Operation rejected for ALL routes as VRF for the given name is not found.
0x3003
|
| SL_RPC_ROUTE_VRF_NO_TABLE |
Operation rejected for ALL routes as VRF's Table ID is not found.
0x3004
|
| SL_RPC_ROUTE_VRF_TABLE_NOT_REGISTERED |
Operation rejected for ALL routes as VRF is not registered with RIB.
0x3005
|
| SL_RPC_ROUTE_VRF_NAME_MISSING |
Route Operation rejected for ALL objects as VRF name is missing.
0x3006
|
| SL_RPC_ROUTE_INIT_MODE_INCOMPATIBLE |
Operation rejected for all routes as the RPC request is not supported for the library's initialization mode.
0x3007
|
| SL_RPC_ROUTE_SERVER_NOT_INITIALIZED |
Operation rejected for all routes as server is not initialized.
0x3008
|
| SL_RPC_ROUTE_NOTIF_SRC_PROTO_TOOLONG |
Operation rejected as the request's SrcProto is too long. 0x3009.
|
| SL_RPC_ROUTE_NOTIF_SRC_PROTO_TAG_TOOLONG |
Operation rejected as the request's SrcProtoTag is too long. 0x300a.
|
| SL_RPC_ROUTE_GET_MATCH_INVALID |
Operation rejected as the requested match value/values/criteria is invalid. 0x300b.
|
| SL_RPC_ROUTE_GET_MATCH_NOTSUP |
Operation rejected as the requested match value/values/criteria is not supported. 0x300c.
|
| SL_ROUTE_START_OFFSET |
!!! Error codes for Route objects.
Offset for route errors. 0x4000
|
| SL_ROUTE_ADD_NO_PATHS |
Route add operation requested but no paths were provided. 0x4001.
|
| SL_ROUTE_UPDATE_NO_PATHS |
Route update operation requested but no paths were provided. 0x4002.
|
| SL_ROUTE_INVALID_PREFIX_LEN |
Route's prefix length is invalid. 0x4003.
|
| SL_ROUTE_INVALID_ADMIN_DISTANCE |
Route's admininstrative distance is invalid. 0x4004.
|
| SL_ROUTE_INVALID_NUM_PATHS |
Route's number of paths exceeds system capabilities. 0x4005.
|
| SL_ROUTE_INVALID_PREFIX_SZ |
Size of IPv6 prefix is invalid. 0x4006.
|
| SL_ROUTE_INVALID_PREFIX |
Route's prefix is invalid. 0x4007.
|
| SL_ROUTE_ERR_RIB_TABLE_LIMIT_REACHED |
Route programming failed in RIB as VRF table limit reached. 0x4008.
|
| SL_ROUTE_ERR_RIB_INVALID_ARGS |
RIB route programming failed in RIB due to invalid arguments. 0x4009.
|
| SL_ROUTE_ERR_RIB_PATH_TABLE_LIMIT |
One or more paths could not be programmed in RIB as VRF table limit reached.
0x400a
|
| SL_ROUTE_ERR_RIB_TOOMANYPATHS |
One or more paths could not be programmed in RIB as number of paths reached system limit.
0x400b
|
| SL_ROUTE_EEXIST |
This route already exists in the database. 0x400c.
|
| SL_ROUTE_HOST_BITS_SET |
Route prefix has host bits set. 0x400d.
|
| SL_ROUTE_INVALID_PREFIX_MCAST |
IPv4 Route prefix is a multicast address. 0x400e.
|
| SL_ROUTE_PATH_AFI_MISMATCH |
Route and Path AFI does not match. 0x400f.
|
| SL_ROUTE_TOOMANY_PRIMARY_PATHS |
Number of primary paths exceeds system capabilities. 0x4010.
|
| SL_ROUTE_TOOMANY_BACKUP_PATHS |
Number of backup paths exceeds system capabilities. 0x4011.
|
| SL_ROUTE_DB_NOMEM |
The route database is out of memory. 0x4012.
|
| SL_ROUTE_INVALID_LOCAL_LABEL |
The route has an invalid local label. 0x4013.
|
| SL_ROUTE_INVALID_FLAGS |
Invalid route flags. 0x4014.
|
| SL_PATH_START_OFFSET |
!!! Error codes for route path objects.
Offset for route path errors. 0x5000
|
| SL_PATH_NH_NO_TABLE |
VRF table for the path could not be determined. 0x5001.
|
| SL_PATH_NH_INTF_NOT_FOUND |
Path next hop interface not found. 0x5002.
|
| SL_PATH_INVALID_LABEL_COUNT |
Number of labels in the path exceeds system capabilities. 0x5003.
|
| SL_PATH_INVALID_ID |
Path ID assigned to the path falls outside the supported range. 0x5004.
|
| SL_PATH_VRF_NAME_TOOLONG |
Path VRF name exceeds supported length. 0x5005.
|
| SL_PATH_NH_INTF_NAME_TOOLONG |
Path next hop interface name exceeds supported length. 0x5006.
|
| SL_PATH_NH_INVALID_ADDR_SZ |
Size of next hop IPv6 address is invalid. 0x5007.
|
| SL_PATH_NH_INF_NAME_MISSING |
Next hop interface name is missing from path. 0x5008.
|
| SL_PATH_INVALID_NEXT_HOP_ADDR |
Path has an invalid next hop address. 0x5009.
|
| SL_PATH_INVALID_REMOTE_ADDR_COUNT |
Number of remote backup addresses in the path exceeds system capabilities.
0x500a
|
| SL_PATH_REMOTE_ADDR_INVALID_SZ |
Size of IPv6 remote backup address is invalid. 0x500b.
|
| SL_PATH_REMOTE_ADDR_AFI_MISMATCH |
Route and Path remote backup address AFI does not match. 0x500c.
|
| SL_PATH_INVALID_PROTECTED_BITMAP |
Path has an invalid protection bitmap. 0x500d.
|
| SL_PATH_BACKUP_MISSING_PRIMARY_PATH |
Protection bitmap of a backup path refers to a missing path. 0x500e.
|
| SL_PATH_PRIMARY_ID_REPEATED |
Too many primary paths with same Path ID. 0x500f.
|
| SL_PATH_BACKUP_ID_REPEATED |
Too many pure backup paths with same Path ID. 0x5010.
|
| SL_PATH_PRIMARY_TOOMANY_BACKUP_PATHS |
A primary path has too many backup paths. 0x5011.
|
| SL_PATH_PRIMARY_TOOMANY_LABELS |
A primary path has too many labels. 0x5012.
|
| SL_PATH_PRIMARY_TOOMANY_REMOTE_ADDR |
A primary path has too many remote addresses. 0x5013.
|
| SL_PATH_REMOTE_ADDR_INVALID |
A pure backup remote address is invalid. 0x5014.
|
| SL_PATH_INVALID_LABEL |
Path has an invalid label. 0x5015.
|
| SL_PATH_ROUTER_MAC_ADDR_INVALID_SZ |
Size of router mac address is invalid. 0x5016.
|
| SL_PATH_BACKUP_TOOMANY_LABELS |
A backup path has too many labels. 0x5017.
|
| SL_PATH_INVALID_VNI |
Invalid VNI for VxLAN encap. 0x5018.
|
| SL_PATH_INVALID_ENCAP_ADDR |
Path has an invalid encap address. 0x5019.
|
| SL_PATH_ENCAP_SRC_DST_AFI_MISMATCH |
Path encapsulation source and destination AFI mismatch. 0x501a.
|
| SL_PATH_RTR_MAC_NOSUP |
PATH router mac is not supported with VxLAN path attributes. 0x501b.
|
| SL_PATH_ENCAP_TYPE_MISMATCH |
Path Encap type attribute does not match specified encapsulation. 0x501c.
|
| SL_RPC_BFD_START_OFFSET |
!!! Error codes for BFD opertations.
Offset for BFD operation errors. 0x6000
|
| SL_RPC_BFD_TOO_MANY_BFD_SESSIONS |
BFD Operation rejected for ALL Sessions as the BFD Session count is beyond supported limit.
0x6001
|
| SL_RPC_BFD_API_BAD_PARAMETER |
BFD Operation rejected due to one or many invalid parameters. 0x6002.
|
| SL_RPC_BFD_API_CLIENT_NOT_REGISTERED |
BFD Operation failed as server is not registered with BFD. 0x6003.
|
| SL_RPC_BFD_API_INTERNAL_ERROR |
BFD Operation failed with internal error. 0x6004.
|
| SL_RPC_BFD_SERVER_NOT_INITIALIZED |
BFD Operation rejected as server is not initialized. 0x6005.
|
| SL_RPC_BFD_V4_NOT_REGISTERED |
BFD IPv4 not registered. 0x6006.
|
| SL_RPC_BFD_V6_NOT_REGISTERED |
BFD IPv6 not registered. 0x6007.
|
| SL_BFD_START_OFFSET |
!!! Error codes for BFD Session objects.
Offset for BFD errors. 0x7000
|
| SL_BFD_INTF_NAME_TOOLONG |
BFD Session's interface name exceeds supported length. 0x7001.
|
| SL_BFD_INTF_NOT_FOUND |
BFD Session's interface not found. 0x7002.
|
| SL_BFD_INVALID_ATTRIBUTE |
BFD Session's tx interval or multiplier are beyond the supported range.
0x7003
|
| SL_BFD_INTF_NAME_MISSING |
BFD Session's interface name is missing. 0x7004.
|
| SL_BFD_INVALID_NBR_MCAST |
BFD Session's neighbor is mcast address. 0x7005.
|
| SL_BFD_INVALID_NBR |
BFD Session's neighbor address is invalid. 0x7006.
|
| SL_BFD_VRF_NAME_TOOLONG |
BFD Session's VRF Name is too long. 0x7007.
|
| SL_BFD_BAD_PARAMETER |
BFD Session's one or more parameters are invalid.
For example, Multihop BFD can not have the interface name set. 0x7008
|
| SL_BFD_API_INTERNAL_ERROR |
BFD Session failed with internal error. 0x7009.
|
| SL_BFD_VRF_NOT_FOUND |
BFD Session's VRF not found. 0x700a.
|
| SL_BFD_INVALID_PREFIX_SIZE |
BFD Session's neighbor IPv6 prefix size is invalid. 0x700b.
|
| SL_BFD_INVALID_SESSION_TYPE |
BFD Session type invalid. 0x700c.
|
| SL_BFD_INVALID_VRF |
BFD Session's VRF is Invalid. 0x700d.
|
| SL_BFD_SESSION_NOT_FOUND |
BFD Session not found. 0x700e.
|
| SL_BFD_SESSION_EXISTS |
BFD Session exists. 0x700f.
|
| SL_BFD_INTERNAL_DB_ERROR |
BFD Internal database error. 0x7010.
|
| SL_BFD_RECOVERY_ERROR |
BFD Recovery error. 0x7011.
|
| SL_RPC_MPLS_START_OFFSET |
!!! Error codes for MPLS opertations.
Offset for MPLS operation errors. 0x8000
|
| SL_RPC_MPLS_ILM_TOO_MANY_ILMS |
Operation rejected for ALL ILMS due to too many ILMS in the request.
0x8001
|
| SL_RPC_MPLS_SERVER_NOT_INITIALIZED |
Operation rejected for all ILMs as server is not initialized.
0x0x8002
|
| SL_RPC_MPLS_INIT_MODE_INCOMPATIBLE |
Operation rejected for all ILMs as the RPC request is not supported for the library's initialization mode.
0x8003
|
| SL_RPC_MPLS_LABEL_BLK_TOO_MANY_LABEL_BLKS |
Operation rejected for ALL label blocks due to too many label blocks in the request.
0x8004
|
| SL_RPC_MPLS_NOT_REGISTERED |
Operation rejected for ALL ILMs as MPLS layer is not registered.
0x8005
|
| SL_ILM_ERR_OFFSET |
!!! MPLS ILM Error codes Offset for MPLS ILM errors.
0x9000
|
| SL_ILM_ADD_FAILED |
MPLS ILM add to service layer failed. 0x9001.
|
| SL_ILM_LSD_ADD_FAILED |
MPLS ILM add to Label Switching Database failed. 0x9002.
|
| SL_ILM_INVALID_NUM_NHLFE |
MPLS ILM NHLFE count exceeded max supported number. 0x9003.
|
| SL_ILM_INVALID_LABEL |
MPLS ILM label value out of range. 0x9004.
|
| SL_ILM_DELETE_FAILED |
MPLS ILM delete from service layer failed. 0x9005.
|
| SL_ILM_LSD_DELETE_FAILED |
MPLS ILM delete from Label Switching Database failed. 0x9006.
|
| SL_ILM_TOOMANY_PRIMARY_NHLFES |
Number of primary NHLFEs exceeds system capabilities. 0x9007.
|
| SL_ILM_TOOMANY_BACKUP_NHLFES |
Number of backup NHLFEs exceeds system capabilities. 0x9008.
|
| SL_ILM_LSD_ADD_LABEL_ALLOC_FAILED |
MPLS ILM label alloc failed in Label switching database. 0x9009.
|
| SL_ILM_LSD_NHLFE_INVALID_ATTRIB |
MPLS ILM NHLFE attribute invalid. 0x900a.
|
| SL_ILM_EEXIST |
MPLS ILM already exists in the database. 0x900b.
|
| SL_ILM_DB_NOMEM |
The ILM database is out of memory. 0x900c.
|
| SL_ILM_INVALID_ELSP_EXP |
EXP value is outside of the valid range of <0-7>. 0x900d.
|
| SL_ILM_ELSP_EXP_OR_DFLT_ALREADY_SET |
EXP value or Default already set. 0x900e.
|
| SL_ILM_ADD_NO_PATHS |
MPLS ILM add operation requested but no paths were provided. 0x900f.
|
| SL_ILM_UPDATE_NO_PATHS |
MPLS ILM update operation requested but no paths were provided. 0x9010.
|
| SL_ILM_UNSUPPORTED_ELSP |
LSP and ELSP on the same label not supported. 0x9011.
|
| SL_ILM_LABEL_TOOMANY_EXP_CLASSES |
Number of EXP classes on the label exceed system capabilities. 0x9012.
|
| SL_ILM_REPLAY_FATAL_ERROR |
MPLS ILMs cannot be played to Label Switching Database on a process restart or connection re-establishment.
The Forwarding Information Base can can be inconsistent. Agent/Controller should initiate a recovery action by reloading the device. 0x9013
|
| SL_ILM_REPLAY_OK |
MPLS ILMs were played to Label Switching Database on a process restart or connection re-establishment.
0x9014
|
| SL_ILM_INVALID_PREFIX_LEN |
ILM's prefix length is invalid. 0x9015.
|
| SL_ILM_HOST_BITS_SET |
ILM prefix has host bits set. 0x9016.
|
| SL_ILM_INVALID_PREFIX_SZ |
Size of IPv6 prefix is invalid. 0x9017.
|
| SL_ILM_INVALID_PREFIX |
ILM's prefix is invalid. 0x9018.
|
| SL_ILM_INVALID_PREFIX_MCAST |
ILM's IPv4 Route prefix is a multicast address. 0x9019.
|
| SL_ILM_VRF_NAME_TOOLONG |
VRF name is too long. 0x9020.
|
| SL_ILM_VRF_NO_TABLE_ID |
VRF's table ID not found. 0x9021.
|
| SL_ILM_VRF_NAME_MISSING |
VRF name of the ILM route not specified. 0x9022.
|
| SL_NHLFE_ERR_OFFSET |
!!! MPLS NHLFE Error codes Offset for MPLS NHLFE errors.
0xa000
|
| SL_NHLFE_NH_NO_TABLE |
MPLS NHLFE vrf table could not be determined. 0xa001.
|
| SL_NHLFE_NH_INVALID_ADDR_SZ |
Size of next hop IPv6 address is invalid. 0xa002.
|
| SL_NHLFE_INVALID_NEXT_HOP_ADDR |
NHLFE has an invalid next hop address. 0xa003.
|
| SL_NHLFE_VRF_NAME_TOOLONG |
Path VRF name exceeds supported length. 0xa004.
|
| SL_NHLFE_NH_INF_NAME_MISSING |
Next hop interface name is missing from path. 0xa005.
|
| SL_NHLFE_NH_INTF_NAME_TOOLONG |
Interface name exceeds supported length. 0xa006.
|
| SL_NHLFE_INVALID_LABEL_COUNT |
Number of labels in the path incompatible with system capabilities for the given label action.
0xa007
|
| SL_NHLFE_INVALID_PATH_ID |
Path id is invalid in NHLFE. 0xa008.
|
| SL_NHLFE_INVALID_LABEL |
MPLS NHLFE label value out of range. 0xa009.
|
| SL_NHLFE_INVALID_PROTECTED_BITMAP |
NHLFE has an invalid protection bitmap. 0xa00a.
|
| SL_NHLFE_INVALID_REMOTE_ADDR_COUNT |
Number of remote backup addresses in the NHLFE exceeds system capabilities.
0xa00b
|
| SL_NHLFE_REMOTE_ADDR_INVALID_SZ |
Size of IPv6 remote backup address is invalid. 0xa00c.
|
| SL_NHLFE_PRIMARY_TOOMANY_LABELS |
A primary NHLFE has too many labels. 0xa00d.
|
| SL_NHLFE_PRIMARY_TOOMANY_REMOTE_ADDR |
A primary NHLFE has too many remote addresses. 0xa00e.
|
| SL_NHLFE_BACKUP_ID_REPEATED |
Too many pure backup NHLFE with same Path ID. 0xa00f.
|
| SL_NHLFE_PRIMARY_ID_REPEATED |
Too many primary NHLFE with same Path ID. 0xa010.
|
| SL_NHLFE_BACKUP_PROTECTED_BITMAP_EMPTY |
Pure backup NHLFE has a empty protected bitmap. 0xa011.
|
| SL_NHLFE_PRIMARY_TOOMANY_BACKUP_PATHS |
A primary NHLFE has too many backup paths. 0xa012.
|
| SL_NHLFE_REMOTE_ADDR_INVALID |
A pure backup remote address is invalid. 0xa013.
|
| SL_NHLFE_BACKUP_MISSING_PRIMARY_PATH |
Protection bitmap of a backup NHLFE refers to a missing path. 0xa014.
|
| SL_NHLFE_NEXT_HOP_MISSING |
NHLFE next-hop missing. 0xa015.
|
| SL_NHLFE_LABEL_ACTION_INVALID |
Label action specified is invalid. 0xa016.
|
| SL_NHLFE_NH_INTF_NOT_FOUND |
NHLFE next hop interface not found. 0xa017.
|
| SL_NHLFE_OPER_FAILED |
MPLS NHLFE operation failed. 0xa018.
|
| SL_NHLFE_LABEL_ACTION_MISSING |
MPLS NHLFE label action missing. 0xa019.
|
| SL_NHLFE_EXP_SET_FAILED |
Setting EXP value failed. 0xa01a.
|
| SL_NHLFE_ELSP_PROTECTION_UNSUPPORTED |
ELSP protection is unsupported. 0xa01b.
|
| SL_NHLFE_INVALID_ELSP_EXP |
EXP value is outside of the valid range of <0-7>. 0xa01c.
|
| SL_NHLFE_INVALID_PATH_PRIORITY |
Path Priority is invalid (valid: 0 or 1). 0xa01d.
|
| SL_NHLFE_INVALID_LOAD_METRIC |
Load metric is not zero for a down path. 0xa01e.
|
| SL_NHLFE_INVALID_SETID |
Set ID value is outside of the valid range of <0-7>. 0xa01f.
|
| SL_NHLFE_INVALID_SETID_PRIORITY |
Two paths with the same Set ID have different path priorities. 0xa020.
|
| SL_NHLFE_INVALID_MULTIPLE_PRIMARY_SETIDS |
Multiple Set IDs are set as the primary. 0xa021.
|
| SL_NHLFE_NON_CONTIGUOUS_SETIDS |
Paths with the same SET ID are not contiguous. 0xa022.
|
| SL_NHLFE_NON_CONTIGUOUS_EXP |
Paths with same EXP classification are not contiguous. 0xa023.
|
| SL_NHLFE_INCONSISTENT_EXP_ON_PATH |
On a ILM, mix of NHLFE with EXP class and others without any EXP class are not allowed. 0xa024.
|
| SL_LABEL_BLK_ERR_OFFSET |
!!! MPLS Label block Error codes Offset for label block errors.
0xb000
|
| SL_LABEL_BLK_LSD_ADD_FAILED |
MPLS label block add from Label Switching Database failed. 0xb001.
|
| SL_LABEL_BLK_LSD_DELETE_FAILED |
MPLS label block delete from Label Switching Database failed. 0xb002.
|
| SL_LABEL_BLK_LSD_LABEL_BLK_NOT_FOUND |
MPLS label block not found. 0xb003.
|
| SL_LABEL_BLK_LSD_LABEL_BLK_IN_USE |
MPLS label block in use. 0xb004.
|
| SL_LABEL_BLK_LSD_INVALID_ATTRIB |
MPLS label block attribute invalid. 0xb005.
|
| SL_LABEL_BLK_INVALID_BLOCK_SIZE |
MPLS label block size > max size per block. 0xb006.
|
| SL_LABEL_BLK_INVALID_START_LABEL |
MPLS label start_label < min label for platform . 0xb007.
|
| SL_LABEL_BLK_EEXIST |
MPLS label block already exists in the database. 0xb008.
|
| SL_LABEL_BLK_DB_NOMEM |
MPLS label database is out of memory. 0xb009.
|
| SL_LABEL_BLK_TYPE_INVALID |
MPLS label block type invalid. 0xb00a.
|
| SL_LABEL_BLK_CLIENT_NAME_TOOLONG |
MPLS label block client name exceeds max length. 0xb00b.
|
| SL_MPLS_REG_ERR_OFFSET |
!!! MPLS Reg error codes Offset for MPLS registration errors.
0xc000
|
| SL_MPLS_REG_ERR |
MPLS registration error. 0xc001.
|
| SL_MPLS_UNREG_ERR |
MPLS unregistration error. 0xc002.
|
| SL_MPLS_EOF_ERR |
MPLS EOF error. 0xc003.
|
| SL_RPC_INTF_START_OFFSET |
!!! Error codes for Interface operations.
Offset for Interface operation errors. 0xd000
|
| SL_RPC_INTF_TOO_MANY_INTERFACES |
Interface Operation rejected for ALL Sessions as the Interface Session count is beyond supported limit.
0xd001
|
| SL_RPC_INTF_SERVER_NOT_INITIALIZED |
Interface Operation rejected as server is not initialized. 0xd002.
|
| SL_RPC_INTF_API_CLIENT_NOT_REGISTERED |
Interface Operation failed as server is not registered with interface manager.
0xd003
|
| SL_INTF_START_OFFSET |
!!! Error codes for Interface objects.
Offset for Interface object errors. 0xe000
|
| SL_INTF_INTERFACE_NAME_MISSING |
Interface object's interface name missing. 0xe001.
|
| SL_INTF_INTERFACE_NAME_TOOLONG |
Interface object's interface name exceeds supported length. 0xe002.
|
| SL_INTF_INTERFACE_REG_ERR |
Interface internal registration error. 0xe003.
|
| SL_INTF_INTERNAL_DB_ERROR |
Internal database error. 0xe004.
|
| SL_INTF_RECOVERY_ERROR |
Interface Recovery error. 0xe005.
|
| SL_INTF_INTERFACE_EXISTS |
Interface exists. 0xe006.
|
| SL_INTF_INTERFACE_NOT_FOUND |
Interface not found. 0xe007.
|
| SL_L2_REG_START_OFFSET |
!!! Error codes for Global L2 operations.
Offset for Global L2 operation errors. 0xf000
|
| SL_L2_REGISTRATION_ERR |
Client cannot be registered with Layer-2 RIB. 0xf001.
|
| SL_L2_UNREGISTRATION_ERR |
Client cannot be unregistered with Layer-2 RIB. 0xf002.
|
| SL_L2_EOF_ERR |
EOF Operation error. 0xf003.
|
| SL_L2_REG_INVALID_ADMIN_DISTANCE |
L2 registration message with invalid admin distance. 0xf004.
|
| SL_L2_REG_IS_DUPLICATE |
Duplicate L2 registration message. 0xf005.
|
| SL_L2_REG_SERVER_NOT_INITIALIZED |
L2 registration rejected as server is not initialized. 0xf006.
|
| SL_RPC_L2_BD_REG_START_OFFSET |
!!! Error codes for L2 Bridge-Domain (BD) Operations.
Offset for L2 BD operation errors. 0x10000
|
| SL_RPC_L2_BD_REG_NAME_MISSING |
Operation is rejected for all BDs as name is missing. 0x10001.
|
| SL_RPC_L2_BD_REG_TOO_MANY_MSGS |
Operation rejected for all BDs due to too many BD registration messages in the request.
0x10002
|
| SL_RPC_L2_BD_REG_SERVER_NOT_INITIALIZED |
Operation rejected for all BDs as server is not initialized.
0x10003
|
| SL_RPC_L2_BD_REG_CLIENT_NOT_REGISTERED |
Operation rejected for all BDs as client is not registered.
0x10004
|
| SL_L2_BD_REG_START_OFFSET |
!!! Error codes for L2 Bridge-Domain (BD) Objects.
Offset for L2 BD object errors. 0x11000
|
| SL_L2_BD_REGISTRATION_ERR |
BD cannot be registered with Layer-2 RIB. 0x11001.
|
| SL_L2_BD_UNREGISTRATION_ERR |
BD cannot be unregistered with Layer-2 RIB. 0x11002.
|
| SL_L2_BD_EOF_ERR |
BD EOF Operation error. 0x11003.
|
| SL_L2_BD_REG_NAME_TOO_LONG |
Name is too long in BD registration message. 0x11004.
|
| SL_L2_BD_REG_BD_NOT_FOUND |
BD not found in BD registration message. 0x11005.
|
| SL_RPC_L2_ROUTE_START_OFFSET |
!!! Error codes for L2 Route operations.
Offset for L2 Route Operation errors. 0x12000
|
| SL_RPC_L2_ROUTE_TOO_MANY_MSGS |
Operation rejected for all L2 routes due to too many messages in the request.
0x12001
|
| SL_RPC_L2_ROUTE_SERVER_NOT_INITIALIZED |
Operation rejected for all L2 routes as server is not initialized.
0x12002
|
| SL_RPC_L2_ROUTE_CLIENT_NOT_REGISTERED |
Operation rejected for all L2 routes as client is not registered.
0x12003
|
| SL_L2_ROUTE_START_OFFSET |
!!! Error codes for L2 Objects.
Offset for L2 object errors. 0x13000
|
| SL_L2_ROUTE_BD_NAME_MISSING |
L2 route operation rejected as BD name is missing. 0x13001.
|
| SL_L2_ROUTE_BD_NAME_TOOLONG |
L2 route operation rejected as BD name is too long. 0x13002.
|
| SL_L2_ROUTE_BD_NOT_FOUND |
L2 route operation rejected as BD not found. 0x13003.
|
| SL_L2_ROUTE_BD_NOT_REGISTERED |
L2 route operation rejected as BD is not registered. 0x13004.
|
| SL_L2_ROUTE_INVALID_ARGS |
L2 route operation rejected due to one or more invalid arguments.
0x13005
|
| SL_RPC_L2_NOTIF_START_OFFSET |
!!! Error codes for L2 Get Notification operations.
Offset for L2 Get Notification Operation errors. 0x14000
|
| SL_RPC_L2_NOTIF_SERVER_NOT_INITIALIZED |
L2 notification request rejected as server is not initialized.
0x14002
|
| SL_RPC_L2_NOTIF_CLIENT_NOT_REGISTERED |
L2 notification request rejected as client is not registered.
0x14003
|
| SL_RPC_L2_NOTIF_ENABLE_ERR |
L2 notification enable error. 0x14004.
|
| SL_RPC_L2_NOTIF_DISABLE_ERR |
L2 notification disable error. 0x14005.
|
| SL_RPC_L2_NOTIF_EOF_ERR |
L2 notification EOF error. 0x14006.
|
| SL_RPC_L2_NOTIF_BD_NAME_MISSING |
L2 notification request rejected as BD name is missing. 0x14007.
|
| SL_RPC_L2_NOTIF_BD_NAME_TOOLONG |
L2 notification request rejected as BD name is too long.
0x14008
|
| SL_RPC_L2_NOTIF_BD_NOT_FOUND |
L2 notification request rejected as BD not found. 0x14009.
|
| SL_PG_VRF_ADD_ERR |
!!! Error codes for path group objects.
Container VRF for PathGroup could not be added. 0x15001
|
| SL_PG_VRF_NO_VRFID |
PathGroup's VRF ID could not be determined. 0x15002.
|
| SL_PG_STR_KEY_TOOLONG |
PathGroup's string key is too long. 0x15003.
|
| SL_PG_TARGET_VRF_NO_VRFID |
ID of a next hop VRF in a path in the PathGroup cannot be determined. 0x15004.
|
| SL_PG_STR_KEY_INVALID |
PathGroup's string key contains invalid characters. 0x15005.
|
| SL_NEXT_HOP_START_OFFSET |
!!! Error codes for Nexthop request objects.
Offset for Nexthop request errors. 0x16000
|
| SL_NEXT_HOP_INVALID_PREFIX_LEN |
Nexthop prefix length is invalid. 0x16001.
|
| SL_NEXT_HOP_HOST_BITS_SET |
Nexthop prefix has host bits set. 0x16002.
|
| SL_NEXT_HOP_INVALID_PREFIX_MCAST |
IPv4 Route prefix is a multicast address. 0x16003.
|
| SL_NEXT_HOP_INVALID_PREFIX |
Nexthop prefix is invalid. 0x16004.
|
| SL_NEXT_HOP_INVALID_NEXT_HOP_ADDR |
Invalid next hop address. 0x16005.
|
| SL_NEXT_HOP_INVALID_PREFIX_SZ |
Size of IPv6 prefix is invalid. 0x16006.
|
| SL_NEXT_HOP_RIB_ADD_FAILED |
Unable to program NH tracking registration to RIB. 0x16007.
|
| SL_ROUTE_REDIST_RIB_ADD_FAILED |
Unable to program route redist registration to RIB. 0x16008.
|
| SL_FIB_START_OFFSET |
Offset for Hardware Ack errors. 0x17000.
|
| SL_FIB_SUCCESS |
The operation is successfully program in hardware. 0x17001.
|
| SL_FIB_FAILED |
FIB programming failure. 0x17002.
|
| SL_FIB_INELIGIBLE |
The operation is not viable to be programmed in hardware at this time. 0x17003.
|
| SL_POLICY_START_OFFSET |
!!! Error codes for operations on policy objects.
Offset for policy object operations. 0x18000
|
| SL_POLICY_ADD_ERR |
Policy object could not be created. 0x18001.
|
| SL_POLICY_EXISTS_ERR |
Policy object already exists. 0x18002.
|
| SL_POLICY_DELETE_ERR |
Policy object delete failed. 0x18003.
|
| SL_POLICY_RULE_ADD_ERR |
Rule could not be created. 0x18004.
|
| SL_POLICY_RULE_EXISTS_ERR |
Rule already exists. 0x18005.
|
| SL_POLICY_RULE_DELETE_ERR |
Rule delete error. 0x18006.
|
| SL_POLICY_APPLY_ERR |
Policy object apply error. 0x18007.
|
| SL_POLICY_UNAPPLY_ERR |
Policy object unapply error. 0x18008.
|
| SL_POLICY_TOO_MANY_POLICIES |
Operation rejected due to too many policies in the request. 0x18009.
|
| SL_POLICY_NAME_TOO_LONG |
Policy name is too long. 0x1800a.
|
| SL_POLICY_RULE_NAME_TOO_LONG |
Rule name is too long. 0x1800b.
|
| SL_POLICY_DUPLICATE_PRIORITY_IN_RULE |
Duplicate priority for the rule in the same policy. 0x1800c.
|
| SL_POLICY_RULE_MOD_NOT_ALLOWED |
Rule modification not allowed. 0x1800d.
|
| SL_POLICY_INVALID_RULE |
Rule belongs to a different policy. 0x1800e.
|
| SL_POLICY_RULE_ADD_NO_RULES |
Rule add operation requested but no rules were provided. 0x1800f.
|
| SL_POLICY_INVALID_MATCH_COUNT_IN_RULE |
Rule add operation requested but no matches were provided. 0x18010.
|
| SL_POLICY_INVALID_ACTION_COUNT_IN_RULE |
Rule add operation requested but no actions were provided. 0x18011.
|
| SL_POLICY_NOT_FOUND |
Policy not found.0x18012.
|
| SL_POLICY_INVALID |
Policy invalid. 0x18013.
|
| SL_POLICY_NAME_MISSING |
Policy name missing. 0x18014.
|
| SL_POLICY_RULE_NAME_MISSING |
Rule name missing. 0x18015.
|
| SL_POLICY_PRIORITY_MISSING_IN_RULE |
Priority missing in rule. 0x18016.
|
| SL_POLICY_TYPE_INVALID |
Invalid policy type. 0x18017.
|
| SL_POLICY_INVALID_DIRECTION |
Invalid policy direction. 0x18018.
|
| SL_POLICY_INTF_NAME_TOOLONG |
Policy object's interface name exceeds supported length. 0x18019.
|
| SL_POLICY_INTF_NAME_MISSING |
Policy object's interface name is missing. 0x1801a.
|
| SL_POLICY_MAX_RULE_LIMIT_REACHED |
Max rule limit within a policy is reached. 0x1801b.
|
| SL_POLICY_VRF_NAME_TOO_LONG |
Vrf name in policy object is too long. 0x1801c.
|
| SL_POLICY_VRF_NAME_MISSING |
Vrf name missing in policy object. 0x1801d.
|
| SL_POLICY_PATH_GRP_NAME_TOO_LONG |
Path Group name in policy object too long. 0x1801e.
|
| SL_POLICY_PATH_GRP_NAME_MISSING |
Path Group name missing in policy object. 0x1801f.
|
| SL_POLICY_INVALID_DSCP_VALUE |
Invalid Dscp Value. 0x18020.
|
| SL_POLICY_PRIORITY_STR_TOO_LONG |
Priority string too long. 0x18021.
|
| SL_POLICY_MAX_INTF_LIMIT_REACHED |
Max interfaces limit in policy reached. 0x18022.
|
| SL_POLICY_RULE_DELETE_NO_RULES |
Rule delete operation requested but no rules were provided. 0x18023.
|
| SL_POLICY_APPLY_NO_INTFS |
Policy apply requested but no interfaces were provided. 0x18024.
|
| SL_POLICY_UNAPPLY_NO_INTFS |
Policy unapply requested but no interfaces were provided. 0x18025.
|
| SL_INTERNAL_START_OFFSET |
!!! Error codes Reserved for internal errors.
Offset for Internal errors. 0x100000
|
