In this post we will cover the provisioning of BGP-EVPN based Layer-2 VPN service
This post covers the configuration of BGP-EVPN based MC-LAG for Multi-Homing of devices on NCS 5500.
This is the first part of the series for EVPN configuration on NCS5500. In this post we will focus on configuring BGP-EVPN Control-Plane & Segment Routing Forwarding-Plane.
In this post, we focus on the speed the system can program routes in RP and in hardware
Second part on the NCS5500 Access-lists. This time, we focus on the Hybrid ACL.
First part of a series of posts on NCS5500 Access-lists
Various questions and answers related to the NCS5500 platform and its software
Introduction of the “Selective Route Download” feature allowing the mix of Base and Scale line cards in the same NCS5500 Chassis.
Second part of the Netflow on NCS5500 Tuto. This time the test results
Is it possible to run the Internet Feed inside a VRF/VPN in an NCS5500 ?
In this article, we analyse the configuration and impact of URPF on NCS5500 systems
Introduction to the NCS5500 Jericho+ Systems and their Scalability
Blog post describing the NCS5500 Netflow implementation.
Brief post on port allocation / NPU for NCS5500
Post #5 on the NCS5500 Resources: very large routing table in eTCAM systems, illustrated in a YouTube Video
Post #4 on the NCS5500 Resources with a YT video to illustrate full internet support on non-eTCAM systems
Third post on the NCS5500 Resources focusing on IPv6 prefixes
Second post on the NCS5500 Resources focusing on IPv4 prefixes
First post on the NCS5500 Resource: today, we cover the platform and the forwarding ASICs
An overview of IOS XR Global Pattern Config Replace feature